The WASTE2H2 project is investigating how to convert plastic waste into valuable products through the integration of ionic liquids, catalysts, and microwave heating
What if plastic waste could become a source of hydrogen and useful chemicals? After 30 months, the WASTE2H2 project has demonstrated important steps toward that ambition while uncovering a central challenge: how to make promising ionic liquids (ILs) and catalysts work together in the same operating window. The findings are guiding a more flexible strategy for plastic waste conversion.
Funded by the European Innovation Council’s Pathfinder Open programme (EIC-Pathfinder), WASTE2H2 explores a high-risk, high-gain combination of ionic liquids (ILs), catalysts, and microwave heating. Its original goal is to generate hydrogen and solid carbon from plastic waste in one process. The priority at this stage is scientific proof of principle, not commercial readiness.
Building on the vision introduced in our first Innovation News Network article, WASTE2H2 is now using its experimental findings to identify how different technologies complement each other and which operating conditions are most promising for future industrial development.
Building the technology platform
Testing the components, ILs and catalysts individually have revealed their performance; integrating them into one stable process is the next challenge. Computer simulations, checked against laboratory results, help select ionic liquids that interact with plastics and respond to microwave heating. This combined approach helped to identify ionic liquids that can dissolve up to 10 wt.% PP as well as smaller amounts of PE. Such dissolution indeed helped the cracking activity.

Some of the newly screened ILs have also shown remarkable thermal stability. In a 12-hour test at 350°C, one of the developed ILs lost less than 0.1% of its mass. This is an encouraging sign of thermal durability, although further work must establish whether it retains its chemical properties during plastic conversion.
Porous catalysts known as acidic zeolites can break long plastic molecules into shorter hydrocarbon chains. One such catalyst promoted cracking at just 230°C under MW irradiation in the absence of ILs, but the same reaction was not observed when the liquid was added. This unexpected difference highlights a central challenge: a material that works on its own may behave differently in the complete process.
A dedicated microwave reactor has also provided an encouraging result for hydrogen production. Without ionic liquid, an iron-oxide-based catalyst produced measurable hydrogen from plastic at 350°C. This shows the potential of microwave heating, although hydrogen generation and ILs stability have not yet been achieved together in the integrated process. In separate microwave tests, it was possible to recover up to 84% of the ILs. Reducing losses and confirming that the recovered material can be reused will be essential as the technology develops.
From scientific results to technological feasibility
For an EIC Pathfinder project, understanding why promising developed ILs and catalysts do not yet work together is itself a valuable scientific result. The most important lesson is that the individual components cannot be considered independently. The original one-step concept must combine plastic cracking, hydrogen and solid-carbon production, catalyst and IL stability, and controlled microwave heating within a single process. Over the course of the project, the consortium has demonstrated important functions separately and identified the barriers to integrating them. Temperature remains a central challenge. With conventional heating, the catalysts tested generally needed 450-500°C to generate substantial hydrogen, while zeolites broke down plastics at lower temperatures into hydrocarbons. Some microwave tests produced hydrogen at lower measured temperatures. The goal is to find conditions that make valuable products without compromising the IL. Identifying these limitations allows resources to be concentrated on the configurations best supported by experimental evidence.
De-risking the route to value
The original single-step hydrogen-and-carbon route remains the project reference. A complementary two-stage approach is now being investigated on the basis of these findings.
In this complementary approach, the consortium is exploring a first stage combining acidic ionic liquids (AILs) and microwave heating to promote the conversion of polyethylene and polypropylene, two common plastics, into smaller hydrocarbons under milder conditions. Recovering and reusing the liquid remain key design objectives. A separate step could convert the hydrocarbons into hydrogen and olefins, compounds that are widely used in the chemical industry. This pathway is under investigation and not yet a demonstrated integrated process.
Next, the consortium will characterise the intermediate products and test how consistently they form and how effectively the AIL can be recovered.
Connecting research with future exploitation
Economic and environmental assessments are progressing alongside laboratory research to identify the most promising process options. The consortium has developed an online modelling framework to evaluate process performance, energy demand and costs, while life-cycle assessment and life-cycle costing will help compare alternatives using experimental data. Importantly, WASTE2H2 benefits from the involvement of two industrial partners: IOLITEC, bringing expertise in IL development and production and SENER, contributing engineering capabilities and leading digital modelling and exploitation planning. Their participation helps bridge the gap between laboratory research and potential industrial applications. Key questions, including product consistency, electricity demand, catalyst and ionic-liquid recovery and reuse, and upgrading requirements, will guide future continuous-flow development and help assess longer-term commercial potential.
Pathfinder research: Turning uncertainty into opportunity
EIC Pathfinder Open supports ambitious ideas that can evolve as evidence emerges. WASTE2H2 is drawing on the shared expertise of its European consortium in chemistry, materials, engineering, microwave technology, and sustainability to turn those findings into a focused experimental plan.
The final phase will prioritise lower-temperature cracking, product characterisation, material durability, and continuous-flow development. By February 2028, the consortium aims to assess the strongest configuration at laboratory scale. After the first 30 months, WASTE2H2 has moved from a bold concept to measurable advances and a clearer technological direction. The next challenge is to bring those advances together in a reliable process that transforms plastic waste into useful products while preserving the catalytic system. By combining advanced materials development, microwave processing, reactor engineering and techno-economic assessment, WASTE2H2 is moving from an ambitious scientific concept toward a more informed pathway for plastic-waste valorisation and further technology development.
Disclaimer
This project has received funding from the European Union’s Horizon Europe research and innovation programme through the European Innovation Council under the grant agreement No. 101130249. The views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union or the granting authority. Neither the European Union nor the granting authority can be held responsible for them.
Please Note: This is a Commercial Profile
Please note, this article will also appear in the 28th edition of our quarterly publication.