Closing the PFAS treatment gap: Helping waste owners destroy contaminants in spent media and concentrates while reducing reliance on storage, transport and off-site disposal
Removing per- and polyfluoroalkyl substances (PFAS) from contaminated water is only part of the treatment process. Activated carbon, ion-exchange resins, and membrane systems can capture or concentrate PFAS, leaving contaminated materials that still require treatment or disposal. For waste owners and remediation providers, that means additional handling and expense, not the end of the clean-up process. The remaining contamination may also create a future liability.
PERSES® from General Atomics Electromagnetic Systems (GA-EMS) is designed to close that gap by destroying PFAS-containing waste on site. The commercially available system uses industrial supercritical water oxidation to destroy PFAS and other hazardous and non-hazardous organic waste at the molecular level. With demonstrated destruction efficiency of 99.99% or greater, it provides an on-site destruction option for applications including PFAS-contaminated spent activated carbon, resin beads, firefighting foam and landfill leachate.
The practical benefit is connecting capture with destruction. Fixed and transportable configurations allow companies to bring treatment capacity to the waste, while full-scale testing establishes performance information relevant to a particular facility or remediation project.
Requirements bring waste treatment into focus
US federal drinking-water requirements and clean-up authorities address different parts of the PFAS problem, but both have implications for treatment planning. Public water systems subject to the federal PFAS drinking-water rule must complete initial monitoring by 26 April 2027. Where treatment is needed, selecting a process to remove PFAS from water also creates a responsibility to manage the resulting spent media or concentrated liquids.
For industrial companies, the designation of certain PFAS as hazardous substances under the Superfund law gives the U.S. Environmental Protection Agency (EPA) enforcement and cost-recovery tools to address releases. Investigation and clean-up decisions remain site-specific, and the designation does not automatically require clean-up at every location or prescribe a particular treatment technology. It does, however, allow EPA to pursue responsible parties for investigation and clean-up costs where the statutory conditions are met.
The EPA’s April 2026 interim guidance addresses the destruction and disposal of PFAS-containing waste after collection. The non-binding guidance provides a framework for evaluating treatment options based on waste characteristics, performance evidence and potential environmental releases. For companies developing a treatment strategy, these considerations extend the decision beyond installing a filter or arranging waste shipment. The complete operating plan must account for the material requiring treatment, the capacity needed to process it and the disposition of the resulting outputs.
From capture to molecular destruction
Capture and destruction perform different functions. Granular activated carbon (GAC) and ion-exchange resins separate PFAS from water by retaining the contaminants on treatment media. Membrane processes such as reverse osmosis produce a concentrated stream that requires further management. These technologies can be important upstream steps, but they do not destroy the captured contamination.
PERSES provides a destruction stage for these waste streams. Its patented reactor combines waste with water and air at 650°C (1,202°F) and 4,000 psi. Under supercritical conditions, oxidation processes accelerate, enabling the breakdown of organic contaminants. The process attacks the carbon-fluorine bonds that make PFAS persistent and converts organic waste into water, carbon dioxide and salts, including those formed when acidic breakdown products are neutralised.
The ability to destroy PFAS and organic co-contaminants simultaneously is significant for industrial applications. A waste stream containing PFAS alongside other organic chemicals can be evaluated as a combined feed rather than treating PFAS as an isolated contaminant. Rarely does a waste stream contain only one contaminant. Most have a variety of organic compounds, including halogen-containing compounds, that require destruction. Joint testing by the EPA and GA-EMS demonstrated greater than 99.99% destruction of the total PFAS measured in the tested aqueous film-forming foam (AFFF) application. That result establishes a performance basis for the application, while waste-specific testing remains important for determining operating conditions and output characteristics.
PERSES brings more than a decade of commercial operating experience to this work. The system has destroyed more than 6 million US gallons of hazardous and non-hazardous waste, an operating record that extends beyond PFAS treatment alone. Tests for leachate, ion-exchange resin beads, and GAC demonstrated PFAS destruction efficiencies greater than 99.999% under tested conditions.
Treating the waste companies actually handle
PFAS treatment projects involve more than contaminated water. Spent filtration media, concentrated firefighting foam, biosolids, and industrial sludges present different processing requirements. PERSES has been successfully tested to destroy more than 200 types of hazardous and non-hazardous waste, encompassing complex feeds as well as individual organic chemicals.
Its tested feed portfolio includes dilute and concentrated AFFF, spent activated carbon, ion-exchange resins, industrial biosludge and leachate. It also includes biosolids after anaerobic digestion, pulp and paper mill sludge, and resin beads in ground or unground form.
For water-treatment operators, PERSES provides an on-site destruction option for PFAS captured in spent GAC and ion-exchange resin beads. The broader organic-waste portfolio includes pharmaceutical waste, pesticide manufacturing wastewater, paint sludges, chlorinated and non-chlorinated waste oils, and corrosive solvent waste. Microplastics and other plastic-bearing waste are also among its applications. This range is relevant to facilities managing multiple organic waste streams or PFAS mixed with other contaminants.
Treatment configuration remains part of the solution. PERSES supports wastewater applications with reverse osmosis as a front end and soil applications with thermal desorption or soil washing as a front end. These arrangements connect upstream processing with molecular destruction rather than assuming every contaminated material enters the reactor directly in its original form.
For a remediation provider, that creates an opportunity to incorporate destruction into an existing treatment sequence. For an industrial facility, it provides a basis for evaluating on-site processing of suitable waste that would otherwise require off-site treatment or disposal.
Full-scale testing: Measurable performance
An equipment decision requires more than a destruction percentage. Waste composition, throughput, continuous operation and process outputs all influence whether a system fits the intended application. EPA’s evaluation framework considers these factors together rather than treating any single performance measure as sufficient.
GA-EMS’ dedicated PERSES test facility in San Diego uses a full-scale industrial system for continuous destruction testing with real-time monitoring, not batch testing. Evaluations include throughput, destruction efficiency, and gas and liquid effluent analysis. Reports support the permitting process.
A customer can assess the waste being treated, the throughput demonstrated, and the characteristics of the resulting outputs before determining the appropriate system configuration. Testing also provides technical information for discussions among the waste owner, equipment supplier and permitting authorities.
The objective is to establish a treatment approach that works as an operating system: the right feed preparation (both liquid and solid-slurry feed), sufficient capacity and a defined path for managing process outputs. This is particularly important when destruction is integrated with an existing capture or concentration process.
Bringing destruction to the site
The location and volume of waste help determine whether a permanent installation or transportable equipment is the better fit. PERSES is available in fixed skid-mounted and transportable configurations matched to site and throughput requirements. Standard units can process 3 to 5 US gallons of PFAS-contaminated liquid per minute, and multiple units can operate in parallel to increase capacity.
A fixed installation supports facilities with continuing waste-generation requirements. A transportable system provides an option for remediation providers serving multiple locations, bringing destruction capability to the project rather than moving all suitable waste to an off-site treatment facility. The system can travel by truck and be offloaded and positioned on-site with minimal infrastructure requirements. Examples of these systems are shown below.
The transportable enclosure includes weather-protected doors and access points, a heater, a leak-tight floor, and internal and external lighting to support around-the-clock operations. These features accommodate treatment outside a conventional indoor installation.
Designed for sustained operation
Treatment capacity depends on keeping equipment operating under demanding conditions. PERSES’ patented reactor is designed to resist corrosion, erosion and salt build-up, supporting continuous throughput with reduced maintenance and downtime.
The process uses water and air without requiring liquid or pure oxygen, or hydrogen peroxide. Its compact, single-process design reduces the need for reprocessing and complex post-treatment, with effluent management determined by the specific application. These characteristics address the equipment, inputs and maintenance associated with an on-site treatment operation. GA-EMS supports PERSES beyond delivery through engineering, procurement, installation, training, spare parts, maintenance and aftermarket services.
Priority destruction applications for PERSES
- PFAS in reverse osmosis concentrate
- Organic contaminants in landfill leachate
- Spent granular activated carbon
- Spent ion-exchange resin beads
- Stored aqueous film-forming foam (AFFF)
- Other hazardous and non-hazardous organic compounds
Completing the treatment strategy
Capturing PFAS is an important treatment step, but the contaminated material still needs a destination. For companies managing suitable PFAS-containing waste, on-site destruction offers an alternative to continued storage or transport for treatment elsewhere. PERSES brings together molecular destruction, broad waste-stream capability and configurable treatment capacity. Full-scale testing and lifecycle support allow waste owners and remediation providers to move from a general interest in PFAS destruction to an application-specific decision about equipment, installation and operation.
For organisations considering procurement, the starting point is a defined waste stream, an anticipated treatment volume and a clear understanding of the site. Those details establish the basis for testing and selecting a system that fits the operating requirement.

Please Note: This is a Commercial Profile
Please note, this article will also appear in the 28th edition of our quarterly publication.